External Hard Drive Can't Read From the Source File or Disk
The error: Tin't read from the source file or deejay in Windows 10
"I ran into 'can't read from the source file or disk' mistake when copying files from my WD external hard disk to my PC with Windows 10 installed. I clicked 'Try Again' push only merely got the same error message. What should I practice to fix this fault? Any advice would be appreciated!"
Why unable to read from the source file or disk?
Usually, tin't read from the source file or deejay mistake occurs during you copy, motion or delete files. It can too occur in Windows vii or Windows 8. This fault tin be related can be related with connection problem, the file itself, source external hard bulldoze bug or target sectionalization space. Some main causes are listed as follows:
-
At that place is something wrong with the USB port or connection cable.
-
The file that you want to copy is too large.
-
The file that going to be copy, delete or move is corrupted.
-
There are file system errors on the source deejay.
-
There are bad sectors on the source external hard disk drive.
-
The local partition doesn't have enough space.
How to fix "tin't read from the source file or deejay" in Windows 10/8/vii?
Here 4 solutions are listed and you tin choose one or more than to ready can't read from the source file or disk accordingly and effectively.
Solution one. Make sure that external hard drive is connected well
Firstly, you should brand sure that the external hard bulldoze is connected with your machine well. Poor connection tin can make the error happen. You can remove external difficult drive from the PC and reconnect it to see if you can re-create, delete or remove file in a success.
Solution two. Convert the file arrangement of destination sectionalisation into NTFS
When the file that will exist copied is too large and the target partition is formatted with FAT32 or FAT16 file system, supporting file size up to 4GB or 2GB, the error may happen. If you are in such a status, you can convert the destination partition from FAT16/FAT32 to NTFS without data loss via a free even so useful conversion tool – AOMEI Partition Assistant Standard.
Step i. Run and fire upwardly the tool. In the main interface, go to All Tools > NTFS to FAT32 Converter.
Step 2. In the popular-up window, choose FAT32 to NTFS and clicyard Nex t.
Step 3. Choose the FAT32 that you lot demand to convert to NTFS and click Side by side button.
Step 4. Click Continue and Yes to confirm this operation.
Step 5 . When the conversion has been complete, you can click Finish.
✍ Tip: If you lot want to get more than advanced features, such as partitioning recovery, MBR to GPT conversion for organization disk and etc, you can upgrade to AOMEI Partition Assistant Professional.
Solution iii. Run Check Deejay tool to fix errors on source disk
If connection is OK and the file is non big, you may consider whether the error is the result of file system mistake or bad sectors of the source hard bulldoze. At this point, you lot can run Bank check Deejay tool to solve the problem. Bank check out the following steps.
Step ane. Double click This PC in Windows x to open File Explorer.
Step 2. Find out the source bulldoze, right-click information technology and choose Backdrop.
Footstep three. Go to Tools and click Check.
Step iv. Practise as the prompts and await for the process to finish.
Solution 4. Fix the external hard bulldoze via formatting
When you have tried the solutions above but nix changed, it is time to format the external hard drive. Still, I have to prompt you that this operation will erase all data on it. Thus, you lot'd ameliorate make a backup earlier formatting. Then, have a look at how to format.
Step 1. Run AOMEI Partition Assistant Standard. Correct-click the sectionalization on the external difficult bulldoze and choose Format Partitioning.
Stride 2. It offers diverse file systems including NTFS, FAT32, exFAT, Ext2, Ext3 and Ext4 and you can choose one based on specific demand. Eg. To format external hard drive with uniform file system for Mac and Windows, y'all can choose exFAT.
Stride iii. Here you can preview the effect of this operation. Click Use and Proceed to commit it.
Final words
If you lot encounter tin can't read from the source file or disk problem, y'all can speculate what is the most possible crusade of it and accept measures responsibly. If you can't get a clue about the sources of this error, you may need to attempt all the same solutions.
Source: https://www.diskpart.com/articles/cannot-read-from-the-source-file-or-disk-0310.html
0 Response to "External Hard Drive Can't Read From the Source File or Disk"
Post a Comment